Ideal pre-sealer with unique chemistry provides an abrasion resistant seal for concrete, stone and terrazzo. Forklift traffic leaves a very low level of tyre mark transfer. Recoats easily and unlike epoxies and urethanes, it can be cleaned and recoated without inter-coat hazing or delamination occurring. Suitable for use as a base seal over old oily floors. Can be applied without special equipment, an Oates poly cotton mop or wax applicator is all that is required.
Caution: Before use, wear impervious chemical resistant gloves and safety glasses with side-shields.
Note: Before use, dilute according to the application type as per the product label.
Long life due to high adhesion
No matter how good the concrete sealer formulation or how tough a film it produces these are meaningless if the sealer cannot adhere to the concrete or stone. BLOCKADE is superior in its adhesion over other water based sealers or direct to the substrate.
Maintain with CROSSFIRE, NEUTRACLEAN or SUPASTAR detergents and degreasers depending on soilage.
For best results, floors should be patch coated in wear areas periodically to maintain a high level of protection and appearance. Floor sealed with BLOCKADE can be easily recoated or touched up in traffic areas. Simply sweep, clean, rinse, allow to dry, then re-coat or patch coat. Where a higher gloss or extra buffability is required, e.g. terrazzo, BLOCKADE should be coated with 2-3 coats of FILMSTAR, GLAZER or MARBLETECH.