The brain of the kit is the T3000 Multifunction meter which can replace a tool box full of individual meters when coupled with the available sensors. The T3000 has data recording capabilities when used with the software data can be downloaded allowing you to manage and evaluate your projects.
The Kit Includes:
- T3000 Multifunction Measuring Meter – The T3000 is the brain of the operation and assists with logging, reporting and works with lots of different accessories.
- TS 250 SDI Climate Sensor – This is going to be helpful, especially if you’re doing heat drying or if you’re working with dehumidification. You want to know what air is coming in and what air is coming out of your dehumidifier. It is a fantastic, good quality hydrometer.
- TS 610 SDI Material Moisture Sensor – For checking moisture up to 30cm below the surface
- TS 131/150 SDI Temperature Sensor – Extremely accurate especially when used with the gel supplied in the kit
- TS 660 SDI Material Moisture Sensor – This meter can go into 40 mm of concrete, it can go through two layers of tiles, it works with timber, walls, flooring, and many other things. This hygrometer is very easy to use.
- TP 7 Infrared Temperature Gun – An infrared temperature gun is going to be able to detect the surface temperature of your materials. This is handy when you’re raising the surface temperature of those materials to get faster drying.
- TS 060 Hand Electrode – We also include a hand-held pin probe with non-insulated pins included. We have a lot of different sizes and you can connect them into the top and run a cable from there to the actual T3000 and then you’ve got a pin meter to check, from timber to walls through to carpet.
- TS 070 Ram-In Electrode – We also include a good quality hammer probe. Start hammer probing into framing or into your timber floors. With other kits, you often only get a couple of different pins. This kit comes with 10 insulated pins. They are fantastic 60ml long pins and 10 of them are included.
- Trotec Silicone Protective Cover for T3000 – The new silicone case protects valuable Trotec T3000 multifunction measuring device.
- TS 016/300 Flat Electrodes, pair, insulated
- Adapter TS 060 on round or flat electrode
- TS 012/300 Round Electrodes, pair, 4 mm, insulated
- TC 20 Connecting Cable, BNC
- TC 30 Connecting Cable, SDI Sensors
- Replacement Electrode Tips
- TS 070 Electrode Tips, 60 mm, Teflon insulated
- Contact Mass for TS 004 / TS 024
- TS 020/110 Brush Electrodes, pair, insulated
- Transport Case II MultiMeasure Series T3000